我国典型资源枯竭型城市生态系统健康综合评价   总被引：3，自引：0，他引：3  

陶晓燕 《地域研究与开发》2010,29(1)

资源枯竭和环境恶化影响着典型资源枯竭型城市的发展。根据"压力-状态-响应"模型,构建了一个度量典型资源枯竭型城市生态系统健康水平的含有4个层次35项具体指标的指标体系,并运用客观的改进的熵值法赋权、模糊综合评价法及划分的等级标准对我国9个典型资源枯竭型城市的生态系统健康水平进行量化分析。结果表明,阜新市的生态系统健康水平属于"较健康"级,伊春、辽源、白银、焦作属于"临界状态"级,盘锦、白山、萍乡属于"较不健康"级,而石嘴山则属于"不健康"级。典型资源枯竭型城市的生态系统健康水平总体上不容乐观。  相似文献   

基于AHP和模糊综合评判的TBM施工风险评估   总被引：7，自引：1，他引：6  

赵延喜  徐卫亚 《岩土力学》2009,30(3):793-798

岩石隧洞建设中面临很大和众多的风险,利用TBM施工的深埋长隧洞受多种不确定因素影响,具有随机性和模糊性,目前的研究方法难以对其进行准确定量分析。通过深入分析影响TBM施工的风险因素,建立了TBM施工风险综合评价指标体系。基于风险影响因素的层次性,提出了TBM施工风险二级模糊综合评判计算模型,并利用层次分析法(AHP)确定各级因素权重,利用模糊集法确定隶属函数,划分了风险接受等级。以南水北调西线工程深埋长隧洞TBM施工为例,应用二级模糊综合评判计算模型对该工程TBM施工风险进行分析,计算结果表明,该方法是合理性实用的。其理论、方法、思路和结论可供同类工程借鉴。  相似文献   

Application of support vector machine to synthetic earthquake prediction     

Chun Jiang  Xueli Wei Xiaofeng Cui  Dexiang You Earthquake Administration of Tianjin Municipality  Tianjin  China Tianjin University of Technology  Tianjin  China 《地震学报(英文版)》2009,(3):315-320

This paper introduces the method of support vector machine (SVM) into the field of synthetic earthquake pre-diction, which is a non-linear and complex seismogenic system. As an example, we apply this method to predict the largest annual magnitude for the North China area (30°E-42°E, 108°N-125°N) and the capital region (38°E-41.5°E, 114°N-120°N) on the basis of seismicity parameters and observed precursory data. The corresponding prediction rates for the North China area and the capital region are 64.1% and ...  相似文献   

合成地震记录制作中的质量控制方法研究   总被引：2，自引：1，他引：1       下载免费PDF全文

宋建国  李辉  刘垒  刘励云 《地球物理学进展》2009,24(1):176-182

合成地震记录制作中的质量控制将最终决定地震地质层位标定的精度,为此,在分析合成地震记录原理基础上,从三个环节对合成地震记录制作进行质量控制:①通过测井数据精确计算反射系数;②提取与地震资料频谱一致、波形和相位稳定的地震子波;③在获得高精度速度场的基础上,从波组、波形、振幅、频率和相位特征等方面进行匹配调整等,通过对各个环节的研究分析,提出了一整套行之有效的质量控制方法,提高合成地震记录的精度,达到层位标定对合成地震记录精度的要求.  相似文献   

Coherence of dispersed synthetic strong earthquake ground motion at small separation distances     

《Soil Dynamics and Earthquake Engineering》2015

It is shown that the observed loss of coherency of synthetic strong motion on ground surface for separation distances less than about 100 m can be described in terms of the dispersion of strong motion waves. Additional contributions to the loss of coherency from variations of material properties in the soil and from geometrical departures from perfectly flat ground surface and irregular layer geometries are not considered in this paper. It is also shown that the synthetic surface displacements over a large rectangular area (100×100 m) on ground surface can be described well by a flat surface undergoing translations and rotations only, and with only minor departures from the plane flat surface.  相似文献   

青海玉树隆宝高寒湿地近地面能量收支状况研究     

李甫  周秉荣  祁栋林  周万福  肖宏斌  校瑞香 《冰川冻土》2015,37(4):916-923

基于青海玉树隆宝湿地2011年10月-2012年9月气象观测数据, 利用组合法计算其近地面的感热通量和潜热通量, 进而分析近地面能量收支状况. 结果表明: 隆宝湿地太阳辐射资源充足, 达6 770.8 MJ·m^-2, 受积雪影响, 冬季日反射率最高可达0.93; 11月和12月地面吸收的90%以上短波能量以辐射形式传给大气, 而6月份则不到30%. 地面全年以净辐射和土壤热通量吸收能量, 其中, 77%以潜热形式支出, 23%以感热形式支出, 但各月能量收支特征与之有所不同.  相似文献   

天山北坡城市群城市综合承载力评价     

程广斌  申立敬 《中国沙漠》2015,35(5):1371-1375

天山北坡城市群是新疆打造丝绸之路经济带核心区的重要载体和节点。以新疆“十二五”规划中天山北坡经济带所覆盖的12个城市为研究对象,从人口、生态环境、资源、经济、公共服务、交通等6个维度构建评价体系,运用改进的熵值法、变异系数等对2011-2013年天山北坡城市群城市综合承载力进行分析。结果表明:天山北坡城市群城市综合承载力空间分异明显且呈固化趋势;资源和经济是造成各城市综合承载力差距的主要原因;生态环境与资源为承载力首要制约因素且二者均超载严重;城市群生态-生产-生活承载力耦合协调度整体有所改善,但情况依旧较差。  相似文献   

‘Box‐Profile’ Ion Implants as Geochemical Reference Materials for Electron Probe Microanalysis and Secondary Ion Mass Spectrometry     

Haosheng Wu  Roman Bttger  Frdric Couffignal  Jens Gutzmer  Joachim Krause  Frans Munnik  Axel D. Renno  Ren Hübner  Michael Wiedenbeck  Ren Ziegenrücker 《Geostandards and Geoanalytical Research》2019,43(4):531-541

Although electron probe microanalysis and secondary ion mass spectrometry are widely used analytical techniques for geochemical and mineralogical applications, metrologically rigorous quantification remains a major challenge for these methods. Secondary ion mass spectrometry (SIMS) in particular is a matrix‐sensitive method, and the use of matrix‐matched reference materials (RMs) is essential to avoid significant analytical bias. A major problem is that the number of available RMs for SIMS is extremely small compared with the needs of analysts. One approach for the production of matrix‐specific RMs is the use of high‐energy ion implantation that introduces a known amount of a selected isotope into a material. We chose the more elaborate way of implanting a so‐called ‘box‐profile’ to generate a quasi‐homogeneous concentration of the implanted isotope in three dimensions, which allows RMs not only to be used for ion beam analysis but also makes them suitable for EPMA. For proof of concept, we used the thoroughly studied mineralogically and chemically ‘simple’ SiO₂ system. We implanted either ⁴⁷Ti or ⁴⁸Ti into synthetic, ultra‐high‐purity silica glass. Several ‘box‐profiles’ with mass fractions between 10 and 1000 μg g^?1 Ti and maximum depths of homogeneous Ti distribution between 200 nm and 3 μm were produced at the Institute of Ion Beam Physics and Materials Research of Helmholtz‐Zentrum Dresden‐Rossendorf. Multiple implantation steps using varying ion energies and ion doses were simulated with Stopping and Range of Ions in Matter (SRIM) software, optimising for the target concentrations, implantation depths and technical limits of the implanter. We characterised several implant test samples having different concentrations and maximum implantation depths by means of SIMS and other analytical techniques. The results show that the implant samples are suitable for use as reference materials for SIMS measurements. The multi‐energy ion implantation technique also appears to be a promising procedure for the production of EPMA‐suitable reference materials.  相似文献   

Seismic characterization of switching platform geometries and dominant carbonate producers (Miocene,Las Negras,Spain)          下载免费PDF全文

Lucas M. Kleipool  Koos de Jong  Eveline L. de Vaal  John J. G. Reijmer 《Sedimentology》2017,64(6):1676-1707

The primary goals of seismic interpretation and quantification are to understand and define reservoir architecture and the distribution of petrophysical properties. Since seismic interpretation is associated with major uncertainties, outcrop analogues are used to support and improve the resulting conceptual models. In this study, the Miocene carbonates of Cerro de la Molata (Las Negras, south‐east Spain) have been selected as an outcrop analogue. The heterogeneous carbonate rocks of the Cerro de la Molata Platform were formed by a variety of carbonate‐producing factories, resulting in various platform morphologies and a wide range of physical properties. Based on textural (thin sections) and petrophysical (porosity, density, carbonate content and acoustic properties) analyses of the sediments, eleven individual facies types were determined. The data were used to produce synthetic seismic profiles of the outcrop. The profiles demonstrate that the spatial distribution of the facies and the linked petrophysical properties are of key importance in the appearance of the synthetic seismic sections. They reveal that carbonate factory and facies‐specific reflection patterns are determined by porosity contrasts, diagenetic modifications and the input of non‐carbonate sediment. The reflectors of the seismograms created with high‐frequency wavelets are coherent with the spatial distribution of the predefined facies within the depositional sequences. The synthetic seismograms resulting from convolution with lower frequency wavelets do not show these details – the major reflectors coincide with: (i) the boundary between the volcanic basement and the overlying carbonates; (ii) the platform geometries related to changes in carbonate factories, thus sequence boundaries; and (iii) diagenetic zones. Changes in seismic response related to diagenesis, switching carbonate producers and linked platform geometries are important findings that need to be considered when interpreting seismic data sets.  相似文献   

全极化SAR图像中溢油极化特征研究   总被引：2，自引：1，他引：1  

郑洪磊  张彦敏  王运华  张晰  孟俊敏 《海洋学报(英文版)》2017,36(5):105-114

相比于单极化SAR图像,全极化SAR图像不仅能体现海面目标的几何特征、后向散射特征,还能体现目标的极化特征。因此,在溢油检测方面,极化SAR更具优势。特征提取作为溢油检测的关键步骤,直接影响到溢油检测的精度。在本文中,我们分析了全极化SAR图像中海面溢油的极化特征,如极化散射熵、平均散射角等。并提出了新的极化特征P,该特征参数能够反映海面目标电磁散射过程中布拉格散射机制和镜面散射机制的比例。为了研究极化特征溢油检测的能力,本文基于SIR-C/X-SAR和Radarsat-2全极化SAR图像开展了相关实验,并对比分析了溢油的多种极化特征。实验结果显示,在中低风速情况下,C波段溢油探测效果优于L波段;本文提出的极化特征P对海面散射机制敏感;基准高度和特征参数P在C波段比其他极化特征更适于溢油检测。  相似文献